Home >

The Most Effective Way To Draw A Good Sketch

2008/8/12 10:52:00 41799

I believe you have seen many sketches of foreign masters. They have won the battle with beautiful lines and smooth lines.

In fact, whether the sketch is good or not depends mainly on the straight line.

Most people do not draw well, that is, they are not smooth lines, repeat too many strokes, lines are not straight, or not smooth curvature.

Drawing lines usually begin to coarser.

It's not natural. These are the main problems!

What's more, perspective is inaccurate!

This is a taboo when drawing sketches.

But it is often natural to commit a crime, and it is natural to add the problems mentioned above.

Look at foreigners.

(foreigner pays attention to the practical application of theory, and perspective is a key to drawing. Therefore, it is very important to pay attention to perspective in practice).

The accuracy of perspective and the fluency of lines are better than bad criteria.

Another point is how to grasp the sense of volume.

I have to admit that foreigners do well!

The above is to let everyone have a correct understanding of the sketches.

How can we draw it well?

Next, I'll explain them one by one.

1 first to find some perspective books to study carefully, this step is very important!

(straight line perspective error of line drawing is zero!

We must have a deep understanding of the 3 principles and basic principles of perspective.

At the same time training spatial imagination] line painting is not good, it does not matter, but perspective must be accurate!

Remember!

As long as you recognize it for less than a week, you will know everything about the perspective of objects.

2 when you feel almost the same, you start training.

Do not look at objects painted in a silent way. Of course, it is not a simple geometry, such as drawing three views of a car, building, facial expressions, and so on.

3 if you have completed the training above, Congratulations, you are the top 60% player.

Why do you say so? Because you have one of the most important qualities of a designer.

4, we must draw the line accurately, first practice drawing a straight line.

The method of drawing is drawn by drawing and drawing. The line is not too short to be finished at a faster speed.

Look at the line you drew.

If you can't do it, practice it until you draw it straight.

Generally, it does not take a long time to draw complex geometric objects at the same time.

5 drawing a curve is a major difficulty, but careful practice is no problem.

First practice circle drawing, use 4 point positioning method and 8 point positioning method to draw, the circle is made up of (circular arc = curve), draw circle, draw half arc = draw curve.

The circle is painted so well that the curve is naturally drawn.

(drawing more, there is a feeling, so it is no problem to draw arbitrary curves.

The 6 sketch is the combination of line and curve and perspective three.

To draw quickly, accurately, and well, the above steps are necessary!!!

(foreigner draws well is also like this) so we should not be afraid!

More than 7 of you have done it well, so you have been crowding the top 90%. If you have a good grasp of the texture of objects, then 97% will still have 3%?

Because there are no 100% Masters (impossible to achieve real perfection), the four point positioning method is to divide 4 equinox points (0 degrees, 90 degrees, 180 degrees, 270 degrees, 360=0 degrees) on a circle, and then cut them out along the straight line along 4 points, even if they are not round.

(principle is the same as polygon shaping method of 3D).

The 8 is to divide 8 points into two equal points. (to be precise, it is recommended to start using 8 points, and then use 4 points better).

The advantage is that the degree of balance is fast and fast (when drawing sketch is used and when the method is used to tune up) the drawback is to make it easier to depict.

Straight line drawing is directly related to balanced reading.

This is different from boxing, because in reality, no one will replace the fast method with a slow way.

(your idea is similar to what I started to practice). There are only 2 ways to write in painting.

It's like painting the super realism into the depiction stage. (the big finger and forefinger clasp the 2/1 of the pen at the same time, using the unitary fingers as the paper, the greatest advantage of this drawing is that it can draw very subtle parts.

The drawback is that it is impossible to draw large area and long lines of painting, so it is used to depict parts.

Each method has its merits and demerits, but in order to draw sketches instead of drawing realistic and fine ones, let me use them.

Some foreigners use left-handed pictures, which is related to the language of his door. The way of writing in English is not limited to handwriting, but Chinese left hand writing is not easy to handle. But I believe you have not written with your left hand.

Generally speaking, of course, it is still necessary to learn from others.


 

  • Related reading

Manufacturing Method Of Synthetic Leather Made Of Base Material And Surface

Shoemaking technology
|
2008/8/12 10:51:00
41797

How To Get Perfect Shoes

Shoemaking technology
|
2008/8/12 10:51:00
41788

Brief Introduction To ERP System Of Shoemaking Industry

Shoemaking technology
|
2008/8/12 10:50:00
41791

What Are The Manifestations Of Shoe Design?

Shoemaking technology
|
2008/8/12 10:48:00
41824

Knowledge Of Roller Skates For Footwear Families

Shoemaking technology
|
2008/8/12 10:46:00
41799
Read the next article

What Are The Basic Control Lines Of Leather Shoes And Their Functions?

No matter whether the stereoscopic design is on the last body of the shoe last, or on the flat surface of the shoe last, it must be based on the rule of the foot type. According to the versatility of the leather shoe design, some representative signs and edge points are selected and connected in a straight line to form the basic framework of the leather shoes sample, which is the basic control line for the leather shoe design. Its main function is to serve as a ruler for the design of the sample