The Accuracy Of Automatic Cutting Is Accurate To 0.1 Mm.

The use of < p > a href= "//www.sjfzxm.com/news/" > automatic cutting bed < /a > completely saves all the essentials that must be grasped in the traditional manual cutting process, so that the whole process can be completed at one go.

The accuracy of the automatic cutting machine design is 0.1 mm, and the accuracy can reach less than 0.1 millimeters in actual production. It can fully meet the production requirements for the production plant, and the quality of machine tailoring is quite stable, and is less affected by human factors.

If it is hand cut, even the same people, the same typesetting, the same fabric, cut out the difference will be relatively large.

< /p >

< p > automatic cutting bed < /p >.

< p > automatic cutting machine can improve the accuracy and avoid the error caused by manual cutting.

Cutting traditional fabrics with traditional electric scissors can barely pass the customs, but for some elastic large and very smooth < a href= "//www.sjfzxm.com/news/index_c.asp > fabric > /a", such as swimsuit fabrics and silk, although it can be cut, it is easy to cause cloth to slip down, the cutting pieces are deformed, causing some unnecessary trouble and affecting the production speed of the factory.

If it is a large number of tailoring tasks, it is very easy to cause the size error of the upper slice and the lower slice.

< /p >

< p > at present, most of the cutting beds in the market adopt the way of blowing or coating coolant to control the cutting temperature, and Eagle technology adopts software control mode, which does not pollute and damage the fabric.

And hawk automatic bed cutting software, for different fabrics have five files to choose from, through simple settings can be completed.

Why do we use the software control method with Eagle cutting beds? The up and down stroke of Eagle cutting beds can reach 18 millimeters. Software control can avoid the damage caused by the high temperature caused by the rapid friction of the cutters.

In addition, the eagle automatic cutting bed also has the function design of software controlled fabric fusion degree.

Thus, the problem of hot melt of fabrics is solved, and the fusible fabrics are treated scientifically and reasonably.

< /p >

The cutting speed of the straight line and the arc part is different when the P and the hawk automatic cutting machine are cut. The computer automatically distinguishes them.

The main purpose of this is to ensure the accuracy of cutting.

< /p >

The grinding system of < p > a href= "//www.sjfzxm.com" > and Eagle automatic cutting bed < /a > adopts diamond, which is a two wheel contra rotating type, and the blade is uniformly and sharpened.

At present, most of the sharpening methods used in the automatic cutting industry are abrasive belts or single side grinding wheels. The blades are wavy, easy to roll, and easy to thread when cutting special fabrics such as silk.

< /p >

< p > and the eagle automatic cutting bed has the common line cutting setting function.

The so-called common line is to simulate manual cutting. If the two pieces have a common edge, only one knife is needed for manual cutting. Some automatic cutting beds need to be cut two times.

The disadvantage is that it wastes time, and when cutting second times, it is easy to cut or cut the cut pieces.

And the eagle bed can imitate the manual action. If you set the common side as a common line, you can finish the cutting.

< /p >

< p > the guide wheel of the eagle automatic cutting bed, the slider and the top hand of the cutterhead ensure that the cutter is vertical up and down to ensure the cutting quality.

< /p >

When P and hawk automatic cutting are cut to the corner, software control can ensure the corner cutting accuracy.

< /p >

To sum up, in comparison with traditional cutting and automatic bed cutting methods, we can find and draw a conclusion that automatic cutting beds have been able to replace traditional cutting and have high precision that traditional cutting does not possess.

< /p >

< p > < /p >.